He informed that an inter-ministerial committee, under the chairmanship of cabinet secretary, has been formed to look into the issue of banning single use plastic in one go or phased manner.Paswan said the final decision would be taken by the government. Therefore, I have asked all manufacturers to send their suggestions by September 11," the minister said, adding that these recommendations would be sent to the inter-ministerial panel and the Prime Ministers Office (PMO) .5 lakh crore and involves seven crore people. He said even pure paper bottle is not an alternative as some plastic is mixed.The ban would not affect employment as the alternative would create jobs, the minister said, while replying to a query on impact of ban on industry and economy. Recycling is an alternative but not a permanent solution.Paswan on Monday held a meeting with bottled water industry and various government departments to find a suitable alternative for single-use plastic bottles for drinking water. We have seen reports of huge quantity of plastics found in stomach of cow," the minister told reporters here.Mehta, who is MD of AVA Natural Mineral, said the bottled water industry is worth Rs 30,000 crore.He said the industry has achieved 92 per cent recycling and will soon achieve 100 per cent.Mehta stressed that paper, glass and steel are neither an affordable alternatives nor environment friendly..Speaking on the sidelines, All India Association of Natural Mineral Water Industry Secretary Behram Mehta said the packaged bottle water industry uses PET (polyethylene terephthalate), which is 100 per cent recyclable and even used globally."Plastic has a big role to play in damaging environment as well as health of human beings and animals.However, he said: "I want to appeal that there is pollution and various diseases because of plastics."We have not got any concrete alternative of packaged drinking water during this meeting. Permanent solution is that plastic should be replaced and there should be a ban".The minister said the railway ministry which manufactures and sell packaged drinking water under Rail Neer brand is also looking into the issue.  

The entire plastic industry is worth Rs 7.Stating that recycling is not a permanent solution, Paswan said there is a need to find an alternative, which is equally affordable and reliable.New Delhi: Food and Consumer Affairs Minister Ram Vilas Paswan asked manufacturers of packaged drinking water, like Pepsi and Coca China OEM Plastic Injection Molding Parts Supplier Cola, to come up with alternative packaging in the next three days as he favoured a ban on plastics because of its health and environmental impact. Consumer Affairs Secretary AK Srivastava and senior officials from environment and chemical ministries as well as Bureau of Indian Standard, FSSAI, IRCTC were present in the meeting

A biodegradable replacement for petroleum-based products has to meet all sorts of standards and, so far, attempts at viable replacements from renewable sources have faced limited success due to processing and economic constraints..Theyre even looking at the potential to attack two environmental problems at once, by seeing how invasive grasses that environmentalists are yanking out of waterways might play with the rubber-infused mix.Theyve discussed using the cake left behind after a fellow researcher extracts oil from spent coffee grounds.

While other attempts at making this type of rubber-enhanced bio-plastic have reduced the strength of the PHBV by as much as 80 per cent, only 30 per cent of the strength was lost in this study - a much more manageable amount, Zhao said.The end product was 75 per cent tougher and 100 per cent more flexible than PHBV on its own - meaning it is far easier to shape into food packaging.The study published in the Journal Polymers has shown that combining natural rubber with bio-plastic in a novel way results in a much stronger replacement for plastic, one that is already capturing the interest of companies looking to shrink their environmental footprints.Other research teams have combined rubber and PHBV, but the products have been too weak to withstand all the demands of a food package - from processing to shipping, to handling in stores and homes, especially containers that are used for freezing and then microwaving, said the studys senior author, Yael Vodovotz. Among the obstacles, products to date have been too brittle for food packaging. Tomato skins are under consideration, as are eggshells."We want something that would otherwise Automotive Interior Injection Plastic Part Molding go to waste that is sustainable and also relatively cheap," Vodovotz said.This new study highlights the greatest success in this area so far, according to scientists. Thats testing its strength.Much of the researchers current focus is on the potential use of various biodegradable - and otherwise environmentally conscious - materials they might use as fillers to further strengthen the mix.A biodegradable replacement for petroleum-based plastics has been marred by various challenges; however, new research has found a way that could yield earth-friendly plastics."Imagine trying to pull a block of concrete apart with your hands. You can never pull it apart, but if youre strong enough you can break it," Cornish said.

Increased flexibility, without a significant loss of strength, is particularly important when it comes to plastic films commonly used to package everything from fresh produce to frozen foods, she said.Beyond packaged foods; a bio-plastic could potentially be used in other food-related applications such as utensils and cutting boards."Previous attempts at this combination were unsuccessful because the softness of the rubber meant the product lost a lot of strength in the process," said lead author Xiaoying Zhao."We could dry them, grind them up and potentially use these grasses as fibrous filler," Vodovotz said.The research team reported success with a rubber-toughened product derived from microbial fermentation that they said could perform like conventional plastic.The new study involved melting rubber into a plant-based thermoplastic called PHBV along with organic peroxide and another additive called trimethylolpropane triacrylate (TMPTA).Toughness, which was improved, is different from strength, explained study co-author Katrina Cornish. But karate chopping it with your hand or foot is testing its toughness - how easily it breaks

The same squad, through B ward Brihan Mumbai Mahanaga-rpalika raided  a shop in Masjid Bandar, and recovered 4,000 kg of plastic packaging. in Chinchbunder and found non-oven polypropylene and plastic PP bags (less than 50 microns) stored in the godown.The Flying Squad has seized a total Plastic Injection Custom Molding factory of 1,359 kg prohibited plastic material by taking action against Ajanta Transport, Malad, East Godown.They seized at least 1003 kg of material.The Flying Squad of the Pollution Control Board and the B ward of Greater Mumbai Municipal Corporation raided the warehouse of Mungipa Roadways Pvt.

The goods were brought from Daman, Gujarat. Ltd.Mumbai: The flying squad of the Maharashtra Pollution Control Board (MPCB) raided  plastic godowns in Malad, Chinchandar and Masjid Bandar in Mumbai and seized thousands of kilograms of plastic material, state environment minister Ramdas Kadam said on Wednesday. Police inspector Dindoshi was informed about the further action and the goods were brought by truck from Gujarat. The assistant manager of the godown, Mahavir Omkarmal Sharma was also fined `5,000.The godown was also fined Rs 5,000

After exclusion of five "social" smokers, the study included 42 patients who were daily smokers before cosmetic surgery.The complication rate after cosmetic surgery was higher in patients who continued to smoke: 24 per cent versus 14 per cent.."The research appears in the journal of Plastic and Reconstructive Surgery.

The authors concluded, "The dialogue between plastic surgeon and patient during the cosmetic surgery consultation serves as a unique moment to provide targeted smoking cessation counseling that may persist well beyond the surgical interaction. Five years after the cosmetic surgery, 47 patients responded to a follow-up survey.The study included 85 patients who were smokers when evaluated for cosmetic surgery.About 70 per cent agreed that discussing their increased surgical risks with the plastic surgeon influenced their ability to quit or reduce smoking.Washington: If youre a smoker and considering cosmetic surgery - tummy tuck, breast-lift and face-lift, then your plastic surgeon will most likely ask you to stop smoking for at least two weeks before you go under the knife. Like most plastic surgeons, Dr."Surgeons, who request preoperative smoking cessation, may influence patients long-term smoking status," Slyke added.Most of the patients were women; the average age was 40 years.  

Nearly one-fourth continued to smoke up to the day of their procedure.In the follow-up survey, about 40 per cent of patients said they no longer smoked cigarettes on a daily basis.The most common procedures were " tummy tuck" (abdominoplasty), breast-lift (mastopexy), andface-lift.A study has recently found that many patients receiving these instructions would quit smoking or at least smoke less in the years after cosmetic surgery. Van Slyke and colleagues required patients to refrain from smoking for at least two weeks before elective procedures."Our results show an association between cosmetic surgery and Automotive Interior Injection Plastic Part Molding Manufacturer smoking cessation at long-term follow-up," said lead study author Aaron C. Nearly one-fourth had not smoked at all since their cosmetic surgery procedure.Those instructions reflect a well-demonstrated increase in wound-healing problems and other negative outcomes among smokers after plastic surgery. Van Slyke from the University of British Columbia, Vancouver

Alternative uses and customers are needed to keep revenue flowing at lidar startups waiting for the expected boom in self-driving cars, which still looks to be years away.Lidar pioneer Velodyne on Tuesday unveiled its smallest sensor to date called Velabit at a price tag of USD100."We never took an exclusively automotive view of lidar," said Angus Pacala, Ouster chief executive and co-founder.  

Those uses include automated trains, intelligent highways and smart cities, and machinery used in construction and mining."Companies also are working to cut the cost of lidar sensors, currently anywhere from about USD 1,200 to more than Aftermarket Plastic injection parts molding Suppliers USD 12,000.Ouster CEO Pacala said the disc jockey customer "wanted to use our sensors in dance music contests to sense what the crowd is doing" to help sync the music to the light show. In addition to small delivery robots and drones, its sensors are being used for disaster relief and rescue on robots that resemble small dogs, Pacala said."Ouster rival AEye is trying to focus on applications close to its core automotive business, according to Akram Benmbarek, head of business development.Ouster, a San Francisco tech startup, is tapping new markets including delivery robots, disaster relief and even an approach from the disc jockey. "But we really want to stay focused and prioritize opportunities that are aligned with our automotive road map. They can be used on robots that scrub floors, deliver groceries and mow the lawn, and on drones mapping fields, forests or construction sites.For smaller lidar companies backed by venture capital, developing new markets is key. Lower prices will make lidar more attractive for new markets.. Another Bay area startup, AEye, is talking to a bank that wants to monitor cattle growth to ensure the financial health of a rancher who is a loan customer. "We always expected to be operating in many different markets.  

The lower price makes them practical for markets beyond the robotaxi and self-driving truck markets.China’s DJI, the world’s largest drone manufacturer, also unveiled a low-cost suite of Livox lidar sensors at CES ranging in price from USD599 to USD999.A future application, Mardirosian said, could be "some kind of super immersive virtual reality experience" such as "an automated tour of the Louvre. Chief Executive Officer Anand Gopalan said it was the first time Velodyne listed a lidar price in its press release because it wanted to show it has "reached a level of scale both from a technology perspective and a manufacturing perspective. Ouster technology is also being used in security systems at nuclear waste facilities.Self-driving cars employ lidar, a remote sensing technology using pulsed laser light the way radar uses radio waves, and lidar makers waiting for the automotive market to take off are courting new customers who would use the technology for everything from monitoring cattle to helping a disc jockey synchronize dance music." He said applications include driver assistance systems.Ouster has more than 550 customers in 50 countries, said corporate development head Raffi Mardirosian.AEye has an inquiry from the bank looking to monitor its cattle rancher loan customer by "scanning his cows in real time and tracking their growth."AEye also has been approached about using its sensors even farther afield, including to track performances at various sporting events "where moving objects are hard to detect by other sensors," he said.""Our tech could handle that," said Benmbarek